Implementation of a cost-effective fuzzy MPPT controller on the Arduino board
Artículo de revista
2018
International Journal on Smart Sensing and Intelligent Systems
This paper presents the implementation of a fuzzy controller on the Arduino Mega board, for tracking the maximum power point of a photovoltaic (PV) module; using low cost materials. A dc-dc converter that incorporates a driver circuit to control the turning on and offof the Mosfet transistor was designed. The controller was evaluated in a PV system consisting of a 65 W PV module and a 12 V/55Ah battery. The results demonstrate the superiority of the fuzzy controller compared to the traditional P & O algorithm, in terms of efficiency and oscillations around the operating point. Este documento presenta la implementación de un controlador difuso en la placa Arduino Mega, para rastrear el punto de máxima potencia de un módulo fotovoltaico (PV); Utilizando materiales de bajo coste. Se diseñó un convertidor dc-dc que incorpora un circuito controlador para controlar el encendido y apagado del transistor Mosfet. El controlador se evaluó en un sistema fotovoltaico que consta de un módulo fotovoltaico de 65 W y una batería de 12 V / 55Ah. Los resultados demuestran la superioridad del controlador difuso en comparación con el algoritmo P & O tradicional, en términos de eficiencia y oscilaciones alrededor del punto de operación.
- Artículos científicos [3156]
Descripción:
Implementation of a cost-effective fuzzy MPPT controller on.pdf
Título: Implementation of a cost-effective fuzzy MPPT controller on.pdf
Tamaño: 1.370Mb
PDFLEER EN FLIP
Título: Implementation of a cost-effective fuzzy MPPT controller on.pdf
Tamaño: 1.370Mb
PDFLEER EN FLIP
El ítem tiene asociados los siguientes ficheros de licencia: