Elaboración de una guía de modelos y procedimientos para el diseño de elementos estructurales acorde a la NSR-10 colombiana - primera parte – vigas de concreto reforzado
Trabajo de grado - Pregrado
2013-09-02
Ingeniería Civil
The thesis topic of this project has been developed with the aim of teaching materials are used to all students who expect to start in the use of models for the design of reinforced concrete structures, in this case the design of concrete beams .
The guide developed for this purpose is located as the final product of this research in Annex A of this document which is divided into six chapters in the first instance to an introduction of the structural design, in the 2nd chapter explains what is the reinforced concrete and materials to this involved, in the 3rd chapter, it present a brief history of the evolution that have structural design methods and the fundamentals needed to implement them. In the 4th chapter describes the design method used by the NSR-10 concerning the deflection of the beam, in the 5th chapter explains the design shear and what this involves and finally in Chapter 6 °, shown it relates to the detailing of reinforcement in the design made. In addition, each chapter presents a variety of examples explained step by step, so that each student engages in a simpler way so related to the structural design of reinforced concrete beam. El tema de tesis de este proyecto, se ha desarrollado con la finalidad de servir de material didáctico a todos aquellos estudiantes que pretender iniciarse en el uso de modelos para el diseño de estructuras de concreto reforzado, en este caso el diseño de las vigas de concreto.
La guía elaborada con este fin se encuentra ubicada como producto final de esta investigación en el anexo A de este documento; la cual se encuentra divida en seis capítulos correspondientes en primera instancia a una introducción del diseño estructural; en el capítulos 2°, se explica lo que es el concreto reforzado y lo materiales que a este involucran; en el capitulo 3°, se presenta una breve reseña histórica de la evolución que han tenido los métodos de diseño estructural así como los fundamentos necesarios para la aplicación de los mismos. En el capitulo 4°, se describe el método diseño utilizado por la NSR-10 referente a la flexión del elemento viga; en el capitulo 5° se explica el diseño a cortante y lo que a este involucra y finalmente en el capitulo 6°, se muestra lo relacionado con el detallamiento del refuerzo en los diseño realizados. Además en cada capitulo se presenta una variedad de ejemplos explicados paso a paso, para que cada estudiante se involucre de una manera más sencilla con lo relacionado al diseño estructural de una viga de concreto reforzado.
- Pregrado [1280]
Descripción:
1140831821 -ELABORACIÓN DE UNA GUÍA DE MODELOS Y PROCEDIMIENTOS PARA EL DISEÑO DE ELEMENTOS ESTRU.pdf
Título: 1140831821 -ELABORACIÓN DE UNA GUÍA DE MODELOS Y PROCEDIMIENTOS PARA EL DISEÑO DE ELEMENTOS ESTRU.pdf
Tamaño: 3.209Mb
PDFLEER EN FLIP
Descripción: ELABORACIÓN DE UNA GUÍA DE MODELOS Y PROCEDIMIENTOS PARA EL DISEÑO DE ELEMENTOS ESTRUCTURALES ACO.doc
Título: ELABORACIÓN DE UNA GUÍA DE MODELOS Y PROCEDIMIENTOS PARA EL DISEÑO DE ELEMENTOS ESTRUCTURALES ACO.doc
Tamaño: 4.094Mb
Título: 1140831821 -ELABORACIÓN DE UNA GUÍA DE MODELOS Y PROCEDIMIENTOS PARA EL DISEÑO DE ELEMENTOS ESTRU.pdf
Tamaño: 3.209Mb
PDFLEER EN FLIP
Descripción: ELABORACIÓN DE UNA GUÍA DE MODELOS Y PROCEDIMIENTOS PARA EL DISEÑO DE ELEMENTOS ESTRUCTURALES ACO.doc
Título: ELABORACIÓN DE UNA GUÍA DE MODELOS Y PROCEDIMIENTOS PARA EL DISEÑO DE ELEMENTOS ESTRUCTURALES ACO.doc
Tamaño: 4.094Mb