Mostrar el registro sencillo del ítem

dc.contributor.authorSousa Santos, Vladimirspa
dc.contributor.authorHernandez Herrera, Hernanspa
dc.contributor.authorQuispe, Enrique Cirospa
dc.contributor.authorViego, Percy Rafaelspa
dc.contributor.authorGómez, Julio Rafaelspa
dc.date.accessioned2018-11-14T15:13:05Z
dc.date.available2018-11-14T15:13:05Z
dc.date.issued2017-12-06
dc.identifier.issn20888708spa
dc.identifier.urihttp://hdl.handle.net/11323/952spa
dc.description.abstractThis paper evaluates the harmonic distortion generated by PWM motor drives in an electrical industrial system of a wheat flour mill company. For this, a comparative study between two industrial circuits connected at the same point of common coupling (PCC) with similar characteristics of load and transformers is presented. The difference is that one circuit has PWM motor drives and the other does not have them. In the study, a practical method based on the statistical characterization of the total harmonic distortion of voltage (THDV) and current (THDI), individual voltage distortion (IVD), individual current distortion (ICD) and K-Factor is applied. As result, it was observed that PWM motor drives generated voltage harmonics mainly of fifth and seventh order with values that exceed limits established by standards in both circuits. With these values, the operation of elements such as capacitors, motors and transformers can be affected. In the work is also demonstrated that in the analysis of harmonics is necessary to consider various parameters and not only one.spa
dc.publisherInternational Journal of Electrical and Computer Engineeringspa
dc.rightsAtribución – No comercial – Compartir igualspa
dc.subjectElectrical industrial systemeng
dc.subjectHarmonic distortioneng
dc.subjectPWM motor driveseng
dc.subjectHarmonic statistical analysiseng
dc.titleHarmonic distortion evaluation generated by PWM motor drives in electrical industrial systemseng
dc.typeArtículo de revistaspa
dc.rights.accessrightsinfo:eu-repo/semantics/openAccessspa
dc.identifier.instnameCorporación Universidad de la Costaspa
dc.identifier.reponameREDICUC - Repositorio CUCspa
dc.identifier.repourlhttps://repositorio.cuc.edu.co/spa
dc.relation.references[1] S. R. Movahed, et al., “Estimation of insulation life of inverter-fed induction motors,” in Proceedings Conference Power Electronic & Drive Systems & Technologies Conference (PEDSTC), pp. 335-339, 2010. [2] G. K. Singh, “A research survey of induction motor operation with non-sinusoidal supply wave forms,” Electric Power Systems Research, vol/issue: 75(2), pp. 200-213, 2005. [3] G. Suresh, et al., “Analysis of the effect of feeder cable on the stator winding voltage stress in a PWM induction motor drive,” in Proceedings Electrical Insulation Conference, 1997, and Electrical Manufacturing & Coil Winding Conference, pp. 407-412, 1997. [4] M. C. Di Piazza and M. Pucci. “Techniques for efficiency improvement in PWM motor drives,” Electric Power Systems Research, vol. 136, pp. 270-280, 2016. [5] M. Chirindo, et al., “Considerations for nonintrusive efficiency estimation of inverter-fed induction motors,” IEEE Transactions on Industrial Electronics, vol/issue: 63(2), pp. 741-749, 2016. [6] C. J. R. Kriel, et al., “The influence of variable speed drives on electric motor opperating temperatures,” in Proceedings Industrial and Commercial Use of Energy Conference (ICUE), pp. 1-6, 2013. [7] R. Mayuri, et al., “Eddy current loss modelling in transformer iron losses operated by PWM inverter,” in Proceedings. Power Electronics, Drives and Energy Systems (PEDES) & 2010 Power India, 2010 Joint International on, pp. 1-5, 2010. [8] M. Digalovski, et al., “Impact of current high order harmonic to core losses of three-phase distribution transformer,” in Proceedings. EUROCON, pp. 1531-1535, 2013. [9] H. Oraee, “A quantative approach to estimate the life expectancy of motor insulation systems,” IEEE Transactions on Dielectrics and Electrical Insulation, vol/issue: 7(6), pp. 790-796, 2000. [10] A. Inan and F. Attar, “The life expectancy analysis for an electric motor due to harmonics,” in Proceedings Electrotechnical Conference, MELECON 98, vol. 2, pp. 997-999, 1998. [11] J. P. G. de Abreu and A. E. Emanuel, “Induction motor thermal aging caused by voltage distortion and imbalance: loss of useful life and its estimated cost,” in Proceedings Industrial and Commercial Power Systems Technical Conference, pp. 105-114, 2001. [12] V. S. Santos, et al., “Procedure for determining induction motor efficiency working under distorted grid voltages,” IEEE Transaction on Energy Conversion, vol/issue: 30(1), pp. 331-339, 2015. [13] P. Donolo, et al., “Voltage unbalance and harmonic distortion effects on induction motor power, torque and vibrations,” Electric Power Systems Research, vol/issue: 140(1), pp. 866-873, 2016. [14] “IEEE Recommended Practice for Monitoring Electric Power Quality,” IEEE Standard 1159, 2009. [15] Y. Wang, et al., “Calculation of high frequency bearing currents of PWM inverter-fed VF induction motor,” in Proceedings 2014 International Power Electronics and Application Conference and Exposition, Shanghai, pp. 1428-1433, 2014. [16] Y. Wang, et al., “Research on discharging bearing currents of PWM inverter-fed variable frequency induction motor,” in Proceedings Electrical Machines and Systems (ICEMS), pp. 2945-2949, 2014. [17] B. Zhu, et al., “Effects of the inverter parameters on the eddy current losses in induction motor fed by PWM inverter,” in Proceedings Electrical Machines and Systems ICEMS 2008, pp. 4240-4243, 2008. [18] A. Strandt, et al., “No-load power losses and motor overheating effects versus PWM switching frequencies,” in Proceedings Renewable Energy Research and Application (ICRERA), pp. 280-283, 2014. [19] D. M. Said, et al., “Analysis of distribution transformer losses and life expectancy using measured harmonic data,” in Proceedings 14th International Conference on Harmonics and Quality of Power - ICHQP 2010, pp. 1-6, 2010. [20] G. W. Massey, “Estimation methods for power system harmonic effects on power distribution transformers,” IEEE Transactions on Industry Applications, vol/issue: 30(2), pp. 485-489, 1994. [21] M. T. Bishop, et al., “Evaluating harmonic-induced transformer heating,” IEEE Transactions on Power Delivery, vol/issue: 11(1), pp. 305-311, 1996. [22] L. W. Pierce, “Transformer design and application considerations for nonsinusoidal load currents,” IEEE Transactions on Industry Applications, vol/issue: 32(3), pp. 633-645, 1996. [23] W. Chen and Z. Cheng, “An experimental study of the damaging effects of harmonics in power networks on the capacitor dielectrics,” in Proceedings Second International Conference on Properties and Applications, vol. 2, pp. 645-648, 1988. [24] C. Boonseng, et al., “Failure analysis of dielectric of low voltage power capacitors due to related harmonic resonance effects,” in Proceedings Power Engineering Society Winter Meeting, 2001. IEEE, Columbus, vol. 3, pp. 1003-1008, 2001. [25] A. Souli and A. Hellal, “Design of a Computer Code To Evaluate the Influence of the Harmonics in the Electrical Networks,” International Journal of Electrical and Computer Engineering, vol/issue: 2(5), pp. 681-690, 2012. [26] M. J. H. Rawa, et al., “Power quality monitoring and simulation of a personal computer based on IEEE 1459- 2010,” in Proceedings International Symposium on Electromagnetic Compatibility, pp. 671-675, 2013. [27] P. Aramwanid and I. Boonyaroonate, “Power quality impact study and analysis of electrical power efficacy in sugar industry,” in Proceedings Conference Electrical Engineering/Electronics, Computer, Telecommunications and Information Technology, pp. 1-4, 2015. [28] M. J. Ghorbani and H. Mokhtari, “Impact of Harmonics on Power Quality and Losses in Power Distribution Systems,” International Journal of Electrical and Computer Engineering, vol/issue: 5(1), pp. 166-174, 2015. [29] Y. Baghzouz, et al., “Time-varying harmonics. I. Characterizing measured data,” IEEE Transactions on Power Delivery, vol/issue: 13(3), pp. 938-944, 1998. [30] A. E. Emanuel and J. A. Orr, “Six-pulse converter atypical harmonics caused by second harmonic voltage,” in Proceedings Conference 10th International Conference on Harmonics and Quality of Power, pp. 340-346, 2002. [31] C. Collombet, et al., “Harmonics disturbances in networks, and their treatment,” Cahier Technique Merlin Gerin, vol/issue: 1(152), pp. 1-31, 1999.spa
dc.type.coarhttp://purl.org/coar/resource_type/c_6501spa
dc.type.contentTextspa
dc.type.driverinfo:eu-repo/semantics/articlespa
dc.type.redcolhttp://purl.org/redcol/resource_type/ARTspa
dc.type.versioninfo:eu-repo/semantics/acceptedVersionspa
dc.type.coarversionhttp://purl.org/coar/version/c_ab4af688f83e57aaspa
dc.rights.coarhttp://purl.org/coar/access_right/c_abf2spa


Ficheros en el ítem

Thumbnail

Este ítem aparece en la(s) siguiente(s) colección(ones)

  • Artículos científicos [3154]
    Artículos de investigación publicados por miembros de la comunidad universitaria.

Mostrar el registro sencillo del ítem