Show simple item record

dc.creatorCenteno Gonzalez, Felipe Orlando
dc.creatorSilva Lora, Electo Eduardo
dc.creatorNova Villa, Helcio Francisco
dc.creatorReyes Martínez, Arnaldo Martín
dc.creatorJaén, René Lesme
dc.date.accessioned2018-11-15T01:08:15Z
dc.date.available2018-11-15T01:08:15Z
dc.date.issued2018-10-01
dc.identifier.issn09721525
dc.identifier.urihttp://hdl.handle.net/11323/1018
dc.description.abstractThermal balance of steam boilers can be done by two ways, the direct or indirect method; the direct method is not accurate. The reason why it is not accurate is that some operating parameters of biomass boilers cannot be obtained by direct measurements, like the measurement of fuel flow. These facts make it difficult to apply the direct method in the heat balance and force to use indirect one to determine these parameters and the boiler efficiency; hence, the indirect method is generally used for heat balance. Indirect method provides more accurate values and additionally, quantifies each of the energy losses, allowing to determinate causes of low efficiency of the equipment. Large amount of data involved implies the use of more affective calculation means; being iterative, assumed values for fuel flow must be compared with a value calculated until both match. In this work, the indirect method has been programmed in MATLAB; and for the preliminary fuel flow evaluation an optimization method could be used to prevent having to assume a value. Calculation details and a MATLAB algorithm are also presented.spa
dc.language.isoengeng
dc.publisherSugar Techeng
dc.relation.ispartof10.1007/s12355-017-0573-zeng
dc.rightsAtribución – No comercial – Compartir igualeng
dc.subjectBoilereng
dc.subjectMATLABeng
dc.subjectThermal Balanceeng
dc.titleProgramming The Inverse Thermal Balance For A Bagasse-Fired Boiler, Including The Application Of A Optimization Method In MATLABeng
dc.typeArticleeng


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record