Propiedades adhesivas de mezclas de almidón de yuca termoplastificado y ácido poliláctico (TPS/PLA)
Artículo de revista
2011-10-31
Corporación Universidad de la Costa
INGE CUC
0122-6517
2382-4700
Adhesivo
Biodegradable
Ácido poliláctico (PLA)
Almidón termoplástico (TPS)
Calorimetría diferencial de barrido (DSC)
Índice de fluidez y análisis dinámico mecánico (DMA)
Adhesive
Polylactic acid (PLA)
Thermoplastic starch (TPS)
Differential scanning calorimetry (DSC)
Melt flow index (MFI)
Dynamic mechanical analysis (DMA)
Biodegradable
Ácido poliláctico (PLA)
Almidón termoplástico (TPS)
Calorimetría diferencial de barrido (DSC)
Índice de fluidez y análisis dinámico mecánico (DMA)
Adhesive
Polylactic acid (PLA)
Thermoplastic starch (TPS)
Differential scanning calorimetry (DSC)
Melt flow index (MFI)
Dynamic mechanical analysis (DMA)
La necesidad de alternativas eco-amigables en todos los ámbitos productivos, ha llevado a la generación de productos innovadores basados en fuentes renovables, sin degradar su funcionalidad. Un adhesivo biodegradable fue desarrollado, basado en una mezcla de almidón termoplastificado (TPS) y de ácido poliláctico (PLA). Se evaluaron las propiedades mecánicas, térmicas y viscoelásticas mediante ensayos de tensión, calorimetría diferencial de barrido (DSC), índice de fluidez y análisis dinámico mecánico (DMA). La formulación TPS 70/30, en la mezcla TPS/PLA: 50/50 puede ser suministrada en forma de pellets, barra o película, ofreciendo propiedades adhesivas comparables al convencional etilenvinil acetato (EVA). The need for eco-friendly alternatives in all areas of production has led to the generation of innovative products based on renewable sources with-out degrading functionality. A biodegradable adhesive was developed based on starch thermoplasticized (TPS) and polylactic acid (PLA) blends. Adhesive properties were evaluated by mechanical, thermal and viscoelas-tic using various techniques: differential scanning calorimetry (DSC), melt flow index (MFI) and dynamic mechanical analysis (DMA). Formulation TPS:70/30, in the blend TPS / PLA: 50/50 can be supplied in the form of pellets, bar or films. This blend offers satisfactory adhesive properties com-parable to ethylene vinyl acetate (EVA)
- Revistas Científicas [1682]
Descripción:
Propiedades adhesivas de mezclas de almidón de yuca termoplastificado y ácido poliláctico (TPSPLA).pdf
Título: Propiedades adhesivas de mezclas de almidón de yuca termoplastificado y ácido poliláctico (TPSPLA).pdf
Tamaño: 1.104Mb
PDFLEER EN FLIP
Título: Propiedades adhesivas de mezclas de almidón de yuca termoplastificado y ácido poliláctico (TPSPLA).pdf
Tamaño: 1.104Mb
PDFLEER EN FLIP