Analysis and optimization for the process of glass tempering using autoclave
Abstract
A mathematical analysis of the glass tempering process was carried out using an autoclave, varying the operating parameters of the system. It was found that the process time can be reduced by up to 3.23% by changing the resistance to 15Ω, but increasing the resistance more than this value would mean compromising the quality of the final product. Thus, it is advisable to make variations of the resistance between 10Ω and15Ω, which will allow the optimization of the process time and pressures without affecting the quality of the result
Referencias:
Fernlund G, Mobuchon C and Zobeiry N 2018 Autoclave Processing Comprehensive Composite Materials II 2nd edition ed Peter W.R. Beaumont and Carl H. Zweben (Amsterdam: Elsevier) chapter 2 pp 42-62 Smolyanov I, Frizen V, Bolotin K and Ulrych B 2017 Research of the induction heating installation on based autoclave Proc. 18th International Conference on Computational Problems of Electrical Engineering (CPEE) (Kutna Hora, Czech Republic: IEEE) pp 1-4 Ling T C, Mo K H, Qu L, Yang J and Guo L 2017 Mechanical strength and durability performance of autoclaved lime-saline soil brick Cons. and Build. Materials 146 403-409 Wood S G, Giannini E R, Ramsey M A and Moser R D 2018 Autoclave test parameters for determining alkali-silica reactivity of concrete aggregates Cons. and Build. Materials 168 683–691 Mousavi S M, Hormozi E, Moradi M, Shamohammadi M and Rakhshan V 2018 Effects of autoclaving versus cold chemical (glutaraldehyde) sterilization on load-deflection characteristics of aesthetic coated archwires Int. Orth. 16(2) 281-293 Bhavsar R C, Patel R A and Bhalja B R 2014 Condition monitoring of induction motor using Artificial Neural Network Annual International Conference on Emerging Research Areas: Magnetics, Machines and Drives (AICERA/iCMMD) (Kottayam, India: IEEE) pp 1-6 Cotoco E K A, et al 2017 Tempering color classification via artificial neural network (ANN ): An intelligent system approach to steel thermography International Conference on Electrical, Electronics and System Engineering (ICEESE) (Kanazawa, Japan: IEEE) pp 84-88 Cuffe S S 1985 A Variable Frequency AC Blower Drive Installation for Efficient and Accurate Control of Glass Tempering IEEE Trans. on Ind. Appl. 4(1) 1047-1052 P. Yu, K. Zhu, T. Sun, N. Yuan, and J. Ding 2017 Heat transfer rate and uniformity of mist flow jet impingement for glass tempering Int. J. Heat Mass Transfer 115(PartB) 368–378 M. Vocialta, M. Corrado, and J. F. Molinari 2018 Numerical analysis of fragmentation in tempered glass with parallel dynamic insertion of cohesive elements Eng. Frac. Mech. 188 448-469 Seidel S, Franke M, Baumann F, Wilson H and Gromnitza U 2018 Enhancing the energy-efficient production of tempered glass by using simulation-based optimisation 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) (Limassol, Cyprus: IEEE) pp 1-4 Altinsu B, Koçak O and Akpek A 2016 Design and analysis of an autoclave simulation using MATLAB /Simulink Medical Technologies National Congress (TIPTEKNO) (Antalya, Turkey: IEEE) pp 1-4 García E, Amaya I y Correa R 2017 Algoritmos de optimización en la estimación de propiedades termodinámicas en tiempo real durante el tratamiento térmico de materiales con microondas Revista UIS Ingenierías 16(2) 29-40 Matajira-Rueda D, Duarte JC, Cervantes JA, Cely CC 2018 Global optimization algorithms applied in a parameter estimation strategy Revista UIS Ingenierías 17(1) 233-242
Fernlund G, Mobuchon C and Zobeiry N 2018 Autoclave Processing Comprehensive Composite Materials II 2nd edition ed Peter W.R. Beaumont and Carl H. Zweben (Amsterdam: Elsevier) chapter 2 pp 42-62 Smolyanov I, Frizen V, Bolotin K and Ulrych B 2017 Research of the induction heating installation on based autoclave Proc. 18th International Conference on Computational Problems of Electrical Engineering (CPEE) (Kutna Hora, Czech Republic: IEEE) pp 1-4 Ling T C, Mo K H, Qu L, Yang J and Guo L 2017 Mechanical strength and durability performance of autoclaved lime-saline soil brick Cons. and Build. Materials 146 403-409 Wood S G, Giannini E R, Ramsey M A and Moser R D 2018 Autoclave test parameters for determining alkali-silica reactivity of concrete aggregates Cons. and Build. Materials 168 683–691 Mousavi S M, Hormozi E, Moradi M, Shamohammadi M and Rakhshan V 2018 Effects of autoclaving versus cold chemical (glutaraldehyde) sterilization on load-deflection characteristics of aesthetic coated archwires Int. Orth. 16(2) 281-293 Bhavsar R C, Patel R A and Bhalja B R 2014 Condition monitoring of induction motor using Artificial Neural Network Annual International Conference on Emerging Research Areas: Magnetics, Machines and Drives (AICERA/iCMMD) (Kottayam, India: IEEE) pp 1-6 Cotoco E K A, et al 2017 Tempering color classification via artificial neural network (ANN ): An intelligent system approach to steel thermography International Conference on Electrical, Electronics and System Engineering (ICEESE) (Kanazawa, Japan: IEEE) pp 84-88 Cuffe S S 1985 A Variable Frequency AC Blower Drive Installation for Efficient and Accurate Control of Glass Tempering IEEE Trans. on Ind. Appl. 4(1) 1047-1052 P. Yu, K. Zhu, T. Sun, N. Yuan, and J. Ding 2017 Heat transfer rate and uniformity of mist flow jet impingement for glass tempering Int. J. Heat Mass Transfer 115(PartB) 368–378 M. Vocialta, M. Corrado, and J. F. Molinari 2018 Numerical analysis of fragmentation in tempered glass with parallel dynamic insertion of cohesive elements Eng. Frac. Mech. 188 448-469 Seidel S, Franke M, Baumann F, Wilson H and Gromnitza U 2018 Enhancing the energy-efficient production of tempered glass by using simulation-based optimisation 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) (Limassol, Cyprus: IEEE) pp 1-4 Altinsu B, Koçak O and Akpek A 2016 Design and analysis of an autoclave simulation using MATLAB /Simulink Medical Technologies National Congress (TIPTEKNO) (Antalya, Turkey: IEEE) pp 1-4 García E, Amaya I y Correa R 2017 Algoritmos de optimización en la estimación de propiedades termodinámicas en tiempo real durante el tratamiento térmico de materiales con microondas Revista UIS Ingenierías 16(2) 29-40 Matajira-Rueda D, Duarte JC, Cervantes JA, Cely CC 2018 Global optimization algorithms applied in a parameter estimation strategy Revista UIS Ingenierías 17(1) 233-242
Collections