Approach methodology for the sustainable design of packaging through computational tools
Case study: water bottles
Date
2019-12
2019-12
Metadata
Show full item record
Show full item record
Abstract
This paper presents a methodological approach that enables reducing design times through parametric analysis and computerized tools. It also describes a case study using the proposed methodology. Technical-economic benefits are presented for the substitution of the bottle's material from PET to ABS over the bottle's life cycle. It was identified that the global carbon footprint of ABS is smaller (0.07 kg CO2e) than that of PET (0.096 kg CO2e) in the manufacture of water bottles. However, in water euritrification there is a negative ratio of 0.4 kg.
Referencias:
[1] Y. Lu, J. Yuan, X. Lu, C. Su, Y. Zhang, C. Wang, X. Cao, Q. Li, J. Su, V. Ittekkot, R.A. Garbutt, S. Bush, S. Fletcher, T. Wagey, A. Kachur y, N. Sweijd, Major threats of pollution and climate change to global coastal ecosystems and enhanced management for sustainability, Environ. Pollut. 239 (2018) 670–680, https://doi. org/10.1016/j.envpol.2018.04.016.
[2] F. Perera, A. Ashraf, P. Kinney y, D. Mills, Towards a fuller assessment of benefits to children’s health of reducing air pollution and mitigating climate change due to fossil fuel combustion, Environ. Res. 172 (2019) 55–72, https://doi.org/10.1016/j.envres.2018.12.016.
[3] M. Cordier y, T. Uehara, How much innovation is needed to protect the ocean from plastic contamination? Sci. Total Environ. (2019) 789–799.
[4] R. Waring, R. Harris y, S. Mitchell, Plastic contamination of the food chain: a threat to human health? Maturitas 115 (2018) 64–68, https://doi.org/10.1016/j. maturitas.2018.06.010.
[5] J.W. Grimaldo Guerrero, A.D. Rodríguez Toscano, L. Vidal Pacheco y, J. Osorio Tovar, Analysis of the energetic and productive effects derived by the installation of a conveyor belt in the metal-mechanic industry, Int. J. Energy Econ. Policy 8 (6) (2018) 196–201.
[6] A. Sagastume, Electricity management in the production of lead-acid batteries: the industrial case, J. Clean. Prod. 198 (2018) 1443–1458, https://doi.org/ 10.1016/j.jclepro.2018.07.105.
[7] A. Guart, F. Bono-Blay, A. Borrell y, S. Lacorte, Effect of bottling and storage on the migration of plastic constituents in Spanish bottled waters, Food Chem. 156 (2014) 73–80, https://doi.org/10.1016/j.foodchem.2014.01.075. e/pms_en.php?show¼ok&make¼ok&aog¼A&kat¼Mahlgut, 2019.
[8] N.D. Steenis, I.A. van der Lans, E.v. Herpen y, H.C.M. van Trijp, Effects of sustainable design strategies on consumer preferences for redesigned packaging, J. Clean. Prod. 205 (2018) 854–865, https://doi.org/10.1016/j.jclepro.2018.09.137.
[9] M. Mcharek, M. Hammadi, T. Azib, C. Laroucib y, J.-Y. Choley, Collaborative design process and product knowledge methodology for mechatronic systems, Comput. Ind. 105 (2019) 213–228, https://doi.org/10.1016/j.compind.2018.12.008.
[10] DNP, Encuesta Nacional de Logística, Departamento Nacional de Planeación, Bogotá, 2018. Available in: https://onl.dnp.gov.co/es/Publicaciones/Paginas/ Encuesta-Nacional-Log%C3%ADstica-2018.aspx.
[11] T. y. L. Instituto Tecnolóogico del Embalaje, Guía práctica de dise~no de envases y embalajes para la distribución de productos, ITENE, Espa~na, 2007. Available in: http://www.itene.com/rs/810/d112d6ad-54ec-438b-9358-4483f9e98868/f8b/filename/guia-diseno-envases-embalajes.pdf.
[12] M. Ozturk y, I. Dincer, Comparative environmental impact assessment of various fuels and solar heat for a combined cycle, Int. J. Hydrogen Energy 44 (10) (2019) 5043–5053, https://doi.org/10.1016/j.ijhydene.2019.01.003.
[13] CES EduPack (Granta Design Ltd), Granta design, Available in: https://grantadesign.com/education/, 2019. [14] Plasticker, Available in: https://plasticker.de/preis
[1] Y. Lu, J. Yuan, X. Lu, C. Su, Y. Zhang, C. Wang, X. Cao, Q. Li, J. Su, V. Ittekkot, R.A. Garbutt, S. Bush, S. Fletcher, T. Wagey, A. Kachur y, N. Sweijd, Major threats of pollution and climate change to global coastal ecosystems and enhanced management for sustainability, Environ. Pollut. 239 (2018) 670–680, https://doi. org/10.1016/j.envpol.2018.04.016.
[2] F. Perera, A. Ashraf, P. Kinney y, D. Mills, Towards a fuller assessment of benefits to children’s health of reducing air pollution and mitigating climate change due to fossil fuel combustion, Environ. Res. 172 (2019) 55–72, https://doi.org/10.1016/j.envres.2018.12.016.
[3] M. Cordier y, T. Uehara, How much innovation is needed to protect the ocean from plastic contamination? Sci. Total Environ. (2019) 789–799.
[4] R. Waring, R. Harris y, S. Mitchell, Plastic contamination of the food chain: a threat to human health? Maturitas 115 (2018) 64–68, https://doi.org/10.1016/j. maturitas.2018.06.010.
[5] J.W. Grimaldo Guerrero, A.D. Rodríguez Toscano, L. Vidal Pacheco y, J. Osorio Tovar, Analysis of the energetic and productive effects derived by the installation of a conveyor belt in the metal-mechanic industry, Int. J. Energy Econ. Policy 8 (6) (2018) 196–201.
[6] A. Sagastume, Electricity management in the production of lead-acid batteries: the industrial case, J. Clean. Prod. 198 (2018) 1443–1458, https://doi.org/ 10.1016/j.jclepro.2018.07.105.
[7] A. Guart, F. Bono-Blay, A. Borrell y, S. Lacorte, Effect of bottling and storage on the migration of plastic constituents in Spanish bottled waters, Food Chem. 156 (2014) 73–80, https://doi.org/10.1016/j.foodchem.2014.01.075. e/pms_en.php?show¼ok&make¼ok&aog¼A&kat¼Mahlgut, 2019.
[8] N.D. Steenis, I.A. van der Lans, E.v. Herpen y, H.C.M. van Trijp, Effects of sustainable design strategies on consumer preferences for redesigned packaging, J. Clean. Prod. 205 (2018) 854–865, https://doi.org/10.1016/j.jclepro.2018.09.137.
[9] M. Mcharek, M. Hammadi, T. Azib, C. Laroucib y, J.-Y. Choley, Collaborative design process and product knowledge methodology for mechatronic systems, Comput. Ind. 105 (2019) 213–228, https://doi.org/10.1016/j.compind.2018.12.008.
[10] DNP, Encuesta Nacional de Logística, Departamento Nacional de Planeación, Bogotá, 2018. Available in: https://onl.dnp.gov.co/es/Publicaciones/Paginas/ Encuesta-Nacional-Log%C3%ADstica-2018.aspx.
[11] T. y. L. Instituto Tecnolóogico del Embalaje, Guía práctica de dise~no de envases y embalajes para la distribución de productos, ITENE, Espa~na, 2007. Available in: http://www.itene.com/rs/810/d112d6ad-54ec-438b-9358-4483f9e98868/f8b/filename/guia-diseno-envases-embalajes.pdf.
[12] M. Ozturk y, I. Dincer, Comparative environmental impact assessment of various fuels and solar heat for a combined cycle, Int. J. Hydrogen Energy 44 (10) (2019) 5043–5053, https://doi.org/10.1016/j.ijhydene.2019.01.003.
[13] CES EduPack (Granta Design Ltd), Granta design, Available in: https://grantadesign.com/education/, 2019. [14] Plasticker, Available in: https://plasticker.de/preis
Collections
The following license files are associated with this item:
Except where otherwise noted, this item's license is described as info:eu-repo/semantics/openAccess