Show simple item record

dc.creatorSousa Santos, Vladimir
dc.creatorCabello Eras, Juan José
dc.creatorSagastume, Alexis
dc.creatorCabello Ulloa, Mario Javier
dc.description.abstractThe data presented in this article was used to assess and compare the most important methods used to estimate the efficiency during the operation of induction motors at different loads and power supply conditions. The experiment was developed in a test bench including a three-phase induction motor of 1.1 kW (De Lorenzo DL 1021). In addition, an adjustable voltage source, a variable-frequency drive, a resistor, and a magnetic powder brake control unit to regulate the load were used during the experiments. A power quality and energy analyzer (Fluke 435 series 6) was used to measure the electric variables during the experiments. Moreover, for the mechanical measures, the sensors of the brake control unit (De Lorenzo DL 1054TT) and a magnetic powder brake (De Lorenzo DL 1019P) were used. In total, 11 load factors were measured at different operation conditions, including balanced sinusoidal voltage, balanced harmonic voltage, unbalanced sinusoidal voltage and unbalanced harmonic voltage. A total of 10 measures were taken for each load factor at each operation condition. The data presented in this paper can be useful in the development and evaluation of new efficiency estimation methods for induction motors, considering different operation conditions and load factors. Moreover, it can serve to assess the impact of the energy quality on the efficiency of induction motors. The data is related to the manuscript “Assessment of the energy efficiency estimation methods on induction motors considering real-time monitoring”spa
dc.description.abstractLos datos presentados en este artículo se utilizaron para evaluar y comparar los métodos más importantes utilizados para estimar la eficiencia durante la operación de motores de inducción a diferentes cargas y condiciones de suministro de energía. El experimento se desarrolló en un banco de pruebas que incluye un motor de inducción trifásico de 1.1 kW (De Lorenzo DL 1021). Además, durante los experimentos se utilizaron una fuente de voltaje ajustable, una unidad de frecuencia variable, una resistencia y una unidad de control de freno de polvo magnético para regular la carga. Se usó un analizador de calidad y energía eléctrica (Fluke 435 serie 6) para medir las variables eléctricas durante los experimentos. Además, para las medidas mecánicas, se utilizaron los sensores de la unidad de control de frenos (De Lorenzo DL 1054TT) y un freno de polvo magnético (De Lorenzo DL 1019P). En total, se midieron 11 factores de carga en diferentes condiciones de operación, incluyendo voltaje sinusoidal equilibrado, voltaje armónico equilibrado, voltaje sinusoidal desequilibrado y voltaje armónico desequilibrado. Se tomaron un total de 10 medidas para cada factor de carga en cada condición de operación. Los datos presentados en este documento pueden ser útiles en el desarrollo y evaluación de nuevos métodos de estimación de eficiencia para motores de inducción, considerando diferentes condiciones de operación y factores de carga. Además, puede servir para evaluar el impacto de la calidad de la energía en la eficiencia de los motores de inducción. Los datos están relacionados con el manuscrito "Evaluación de los métodos de estimación de eficiencia energética en motores de inducción considerando monitoreo en tiempo real"spa
dc.publisherData in Briefspa
dc.rightsCC0 1.0 Universal*
dc.subjectMotor efficiency estimation methodsspa
dc.subjectEnergy efficiencyspa
dc.subjectInduction motorsspa
dc.subjectVoltage unbalancespa
dc.subjectMétodos de estimación de la eficiencia del motorspa
dc.subjectEficiencia energéticaspa
dc.subjectMotores de inducciónspa
dc.subjectDesequilibrio de voltajespa
dc.titleData to support the assessment of the energy efficiency estimation methods on induction motors considering real-time
dc.title.alternativeDatos para respaldar la evaluación de los métodos de estimación de eficiencia energética en motores de inducción considerando monitoreo en tiempo
dcterms.references[1] V. Sousa Santos, J.J. Cabello Eras, A. Sagastume Gutierrez, M.J. Cabello Ulloa, Assessment of the energy efficiency estimation methods on induction motors considering real-time monitoring, Meas. J. Int. Meas. Confed. 136 (2019) 237–247.
dcterms.references[2] B. Lu, T.G. Habetler, R.G. Harley, A nonintrusive and in-service motor-efficiency estimation method using air-gap torque with considerations of condition monitoring, IEEE Trans. Ind. Appl. 44 (2008) 1666–1674. 1109/
dcterms.references[3] A.G. Siraki, P. Pillay, An in situ efficiency estimation technique for induction machines working with unbalanced supplies, IEEE Trans. Energy Convers. 27 (2012) 85–95.
dcterms.references[4] M. Hasanuzzaman, N.A. Rahim, R. Saidur, S.N. Kazi, Energy savings and emissions reductions for rewinding and replacement of industrial motor, Energy. 36 (2011) 233–240.
dcterms.references[5] J.S. Hsu, S. Member, J.D. Kueck, S. Member, M. Olszewski, D.A. Casada, P.J. Otaduy, L.M. Tolbert, Comparison of Induction Motor Field Efficiency Evaluation Methods, IEEE Trans. Ind. Appl. 34 (1996) 117–
dcterms.references[6] M.O. Adissi, A.C. Lima Filho, R.D. Gomes, D.M.G.B. Silva, F.A. Belo, Implementation and Deployment of an Intelligent Industrial Wireless System for Induction Motor Monitoring, J. Dyn. Syst. Meas. Control. 139 (2017) 124502. https: //
dcterms.references[7] M.M. Stopa, M.A. Saldanha, A.A. Luiz, L.M.R. Baccarini, G.A.M. Lacerda, A Simple Torque Estimator for In-Service Efficiency Determination of Induction Motors, IEEE Trans. Ind. Appl. 54 (2018) 4967–4976.
dcterms.references[8] B. Lu, T.G. Habetler, R.G. Harley, A nonintrusive efficiency estimation method for in-service motor testing using a modified induction motor equivalent circuit, in: 2006 37th IEEE Power Electron. Spec. Conf., 2006: pp. 1–6.
dcterms.references[9] M. Al-Badri, P. Pillay, P. Angers, A Novel in Situ Efficiency Estimation Algorithm for Three-Phase Induction Motors Operating with Distorted Unbalanced Voltages, IEEE Trans. Ind. Appl. 53 (2017) 5338–5347.

Files in this item


This item appears in the following Collection(s)

Show simple item record

CC0 1.0 Universal
Except where otherwise noted, this item's license is described as CC0 1.0 Universal