Show simple item record

dc.creatorZenato Rissardi, Cristyan
dc.creatorMasiero Gil, Augusto
dc.creatorEhrenbring, Hinoel Zamis
dc.creatorLi, Zongjin
dc.creatorTutikian, Bernardo
dc.date.accessioned2021-02-23T18:50:11Z
dc.date.available2021-02-23T18:50:11Z
dc.date.issued2021-02-19
dc.identifier.issn1751-7648
dc.identifier.urihttps://hdl.handle.net/11323/7909
dc.description.abstractThis paper aimed to develop a method to analyze and rank self‐consolidating concrete (SCC) according to its robustness, considering isolated and simultaneous variations in its main components, like water (±6%) and cement content (ΔC±), in three matrices with binder to aggregate ratio (rich, intermediate and poor). In the experimental campaign, only water variations (±6%) were considered, and the cement content variations were considered in the analytical method. The method regarded the behavior of SCC in fresh and hardened states and turned out to be potentially useful to the academic community and the industry. The simple additive weighting method was used for that reason, which is probably the most adopted among methods for decisions with multiple variables due to its simplicity. Among the families studied, the poor mixture presented the lowest robustness with variation in water content due to the higher initial w/c ratio. However, for the condition ΔC±, the poor mixture achieved the second‐best robustness index. The rich mixture behaved differently as it was ranked second for ±6% of water and the worst for ΔC± due to slump‐flow and segregation results. The intermediate matrix presented the highest robustness in both conditions analyzed, water (±6%), and cement content (ΔC±).spa
dc.format.mimetypeapplication/pdfspa
dc.language.isoengspa
dc.publisherCorporación Universidad de la Costaspa
dc.rightsCC0 1.0 Universal*
dc.rights.urihttp://creativecommons.org/publicdomain/zero/1.0/*
dc.sourceStructural Concretespa
dc.subjectMixture design methodspa
dc.subjectRobustness indexspa
dc.subjectSelf‐consolidating concretespa
dc.titleEvaluating the robustness of self‐consolidating concrete: an approach to the mix design procedurespa
dc.typePreprintspa
dc.type.hasVersioninfo:eu-repo/semantics/draftspa
dc.source.urlhttps://onlinelibrary.wiley.com/doi/10.1002/suco.202000566spa
dc.rights.accessrightsinfo:eu-repo/semantics/openAccessspa
dc.identifier.doihttps://doi.org/10.1002/suco.202000566


Files in this item

Thumbnail
Thumbnail

This item appears in the following Collection(s)

Show simple item record

CC0 1.0 Universal
Except where otherwise noted, this item's license is described as CC0 1.0 Universal