Show simple item record

dc.creatorViego, Percy
dc.creatorGómez, Julio R.
dc.creatorSousa Santos, Vladimir
dc.creatorMonteagudo Yanes, José Pedro
dc.creatorQuispe, Enrique C.
dc.date.accessioned2021-03-04T19:51:46Z
dc.date.available2021-03-04T19:51:46Z
dc.date.issued2019-08-03
dc.identifier.issn2088-8694
dc.identifier.urihttps://hdl.handle.net/11323/7958
dc.description.abstractThis paper aims to evaluate the performance of synchronous reluctance motors assisted by a permanent magnet (PMa-SynRM) focused on efficiency and torque pulsations. PMa-SynRM shows high efficiency and power factor, compared to induction motors (IM), although they have a greater cost. These machines develop relatively high torque ripple, cogging torque, and torque imbalances. Consequently, the electromagnetic torque is reduced, the motor temperature is increased, and mechanical vibrations are induced. The optimal design of the machine structures such as flow barriers, permanent magnets, and stator slots, among others, allow reducing torque pulsations. A comparison is made between different designs of the PMa-SynRM reported in the scientific literature, and the effects on efficiency, torque pulsation, and operating costs are evaluated. A case study on the motor driving the air conditioner blower in a hotel room was made, to determine the best economic variant between IM or PMa-SynRM. A sensitive analysis was made to evaluate several uncertainties. The advantages of using one of the PMa-SynRM analyzed were demonstrated. Also, it was proved that the investment is feasible economically, although NPV and payback are not the best, due to low load factor in inverter-controlled motors in air conditioners.spa
dc.format.mimetypeapplication/pdfspa
dc.language.isoengspa
dc.publisherCorporación Universidad de la Costaspa
dc.rightsCC0 1.0 Universal*
dc.rights.urihttp://creativecommons.org/publicdomain/zero/1.0/*
dc.sourceInternational Journal of Power Electronics and Drive Systemsspa
dc.subjectPermanent magnet motor drivesspa
dc.subjectSynchronous reluctance motor drivesspa
dc.subjectTorque ripplespa
dc.subjectCogging torquespa
dc.subjectEconomic analysisspa
dc.titleReducing torque pulsations in PMa-SynRM: A way for improving motor performancespa
dc.typearticlespa
dcterms.references[1] L. Collazo, et al., “A new exact equivalent circuit of the medium voltage three-phase induction motor,” International Journal of Electrical and Computer Engineering (IJECE). vol. 10, no. 6, pp. 6164-6171, 2020.spa
dcterms.references[2] V. Sousa, et al, “Estimating induction motor efficiency under no-controlled conditions in the presences of unbalanced and harmonics voltages,” in 2015 CHILEAN Conference on electrical, electronics engineering, information and communication technologies (CHILECON), 2015, pp. 567 - 572.spa
dcterms.references[3] V. Sousa, et al., “Harmonic distortion evaluation generated by PMW motor drives in electrical industrial systems,” International Journal of Electrical and Computer Engineering (IJECE), vol. 7, no. 6, pp. 3207-3216, 2017.spa
dcterms.references[4] D. R. Quintero, et al., “Methodology to measure electric discharge machining (EDM) bearing currents in induction motors with supply from a variable speed drive (VSD),” INGE CUC, vol. 9, no. 2, pp. 83-93, 2013.spa
dcterms.references[5] V. Sousa, et al., “Assessment of the energy efficiency estimation methods on induction motors considering real-time monitoring,” Measurement, vol. 136, pp. 237–247, 2019.spa
dcterms.references[6] A. T. de Almeida, et al., “Beyond induction motors—technology trends to move up efficiency,” IEEE Transactions on Industry Applications, vol. 50, no. 3, pp. 2103-2114, 2014.spa
dcterms.references[7] E. I. Mbadiwe, et al., “Permanent magnet flux switching motor technology as a solution for high torque clean electric vehicle drive,” International Journal of Power Electronics and Drive System (IJPEDS), vol. 10, no. 2, pp. 575-584, 2019.spa
dcterms.references[8] F. A. Hasan and L. J. Rashad, “Fractional-order PID controller for permanent magnet DC motor based on PSO algorithm,” International Journal of Power Electronics and Drive System (IJPEDS), vol. 10 no. 4, pp. 1724-1733, 2019.spa
dcterms.references[9] D. Mingardi and N. Bianchi, “Line-start pm-assisted synchronous motor design, optimization, and tests,” IEEE Transactions on Industrial Electronics, vol. 64, no. 12, pp. 9739-9747, 2017.spa
dcterms.references[10] R. Vartanian and A.H.A.Toliat, “Design and comparison of an optimized permanent magnet-assisted synchronous reluctance motor (PMa-SynRM) with an induction motor with identical NEMA Frame stators,” in Electric Ship Technologies Symposium (ESTS), Baltimore, USA, 2009, pp. 107-112, 2009.spa
dcterms.references[11] Q. Lin, et al., “Design and optimization of a reluctance-torque-assisted synchronous motor with high efficiency and low torque ripple,” in 2019 22nd International Conference on Electrical Machines and Systems (ICEMS), Harbin, China, pp. 1-4, 2019.spa
dcterms.references[12] Won-ho Kim, et al., “Optimal PM design of PMa-SynRM for wide constant-power operation and torque ripple reduction”, IEEE Transactions on Magnetics, vol. 45, no. 10, pp. 4660-4663, 2009.spa
dcterms.references[13] P.R. Viego, et al., “Direct-on-line-start permanent-magnet-assisted synchronous reluctance motors with ferrite magnets for driving constant loads,” International Journal of Electrical and Computer Engineering (IJECE), vol. 10, no. 1, pp. 651-659, 2020.spa
dcterms.references[14] S. Huang, et al., “Optimization the electromagnetic torque ripple of permanent magnet synchronous motor.” in 2010 International Conference on Electrical and Control Engineering, Wuhan, China, pp. 3969-3972, 2010.spa
dcterms.references[15] J. Li, H., et al., "Vibration analysis of permanent-magnet-assisted synchronous reluctance machines," in 2019 22nd International Conference on Electrical Machines and Systems (ICEMS), Harbin, China pp. 1-6, 2019.spa
dcterms.references[16] M. T. Bin Tarek, J. Herbert and S. Choi, “Analysis of unbalanced magnetic pull of permanent magnet assisted synchronous reluctance motor based on uneven axial temperature distribution of magnets,” in 2017 IEEE International Electric Machines and Drives Conference (IEMDC), Miami, FL, pp. 1-6, 2017.spa
dcterms.references[17] B. Silwal, M. N. Ibrahim and P. Sergean, “Performance of PM-assisted synchronous reluctance machine under rotor eccentricity,” in 2018 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), Amalfi, pp. 319-323, 2018.spa
dcterms.references[18] B. Gaussens, et al., “Torque ripple mitigation of PM-assisted synchronous reluctance machine: design and optimization,” in 2017 20th International Conference on Electrical Machines and Systems (ICEMS), Sidney, NSW, pp. 1-6, 2017.spa
dcterms.references[19] P. Niazi and H.A. Toliyat, “Design of a low-cost concentric winding permanent magnet assisted synchronous reluctance motor drive,” in Fourtieth IAS Annual Meeting. Conference Record of the 2005 Industry Applications Conference, Kowloon, Hong Kong, vol. 3, pp. 1744-1748, 2005.spa
dcterms.references[20] Wu Ren, et al., “Reducing cogging torque and suppressing torque ripple in PMASynRM for EV/HEV applications,” in 2014 IEEE Conference and Expo Transportation Electrification Asia-Pacific (ITEC Asia-Pacific), Beijing, pp. 1-6, 2014.spa
dcterms.references[21] A. Tap, et al., “Effects of the rotor design parameters on the torque production of a PMaSynRM for washing machine applications”, in 2017 International Conference on Optimization of Electrical and Electronic Equipment (OPTIM) & 2017 Intl Aegean Conference on Electrical Machines and Power Electronics (ACEMP), Brasov, pp. 370-375, 2017.spa
dcterms.references[22] A. O. Dulanto, “Design of a synchronous reluctance motor assisted with permanent magnets for pump applications,” M.S. Thesis, Dept. of Elec. Eng., KTH Royal Ins. of Technology, Sweden, 2016.spa
dcterms.references[23] H.C. Liu, et al., "Design of permanent magnet-assisted synchronous reluctance motor for maximized back-emf and torque ripple reduction," IEEE Transactions on Magnetics, vol. 53, no. 6, pp.1-4, 2017.spa
dcterms.references[24] B. Kerdsup, et al., “Design of permanent magnet-assisted synchronous reluctance motors with maximum efficiency-power factor and torque per cost” in 2018 XIII International Conference on Electrical Machines (ICEM), Alexandroupoli, pp. 2465-2471, 2018.spa
dcterms.references[25] A. Tap, et al., “Effects of the stator design parameters on the torque performance of a PMaSynRM,” in 2017 11th IEEE International Conference on Compatibility, Power Electronics and Power Engineering (CPE-POWERENG), Cadiz, pp. 346-351, 2017.spa
dcterms.references[26] C.M. Spargo, et al, “Application of fractional slot concentrated windings to syncronous reluctance motor”, IEEE Transactions on Industry Applications, vol.51, pp. 1446-1455, 2015.spa
dcterms.references[27] O. Payza, et al., “Investigation of losses for a concentrated winding high-speed permanent magnet-assisted synchronous reluctance motor for washing machine application,” IEEE Transactions on Magnetics, vol. 54, no. 11, pp. 1-5, 2018.spa
dcterms.references[28] M. Gamba, et al., "A new PM-assisted synchronous reluctance machine with a nonconventional fractional slot per pole combination," in Optimization of Electrical and Electronic Equipment (OPTIM), 2014 International Conference, Bran, Romania, pp. 268-275, 2014.spa
dcterms.references[29] X. Cheng, et al., “Permanent magnet assisted synchronous reluctance machine with fractional-slot winding configurations,” in 2013 International Electric Machines and Drives Conference, Chicago, IL, pp. 374-381, 2013.spa
dcterms.references[30] W. Ren, et al., “Reducing cogging torque and suppressing torque ripple in PMASynRM for EV/HEV applications”, in Proceedings of the Conference and Expo Transportation Electrification Asia-Pacific (ITEC Asia-Pacific), Beijing, pp. 1-6, 2014.spa
dcterms.references[31] M. J. S. Zuberi, et al., “Techno-economic analysis of energy efficiency improvement in electric motor driven systems in Swiss industry”, Applied Energy, vol. 205, pp. 85–104, 2017.spa
dcterms.references[32] Y. Özkara and M. Atak, “Regional total-factor energy efficiency and electricity saving potential of manufacturing industry in Turkey”, Energy, vol. 93, pp. 495–510, 2015.spa
dcterms.references[33] C.J. Verucchi, et al, “High efficiency electric motors: economic and energy advantages”, IEEE Latin America Transactions, vol. 11, no. 6, pp. 1325-1331, 2013.spa
dcterms.references[34] Resolution No. 28-2011: “Electric rates for the non-residential sector”, Ministry of Finance and Prices, Havana, 2011.spa
dcterms.references[35] E. Sierra, et al., “obtaining load Curves of Distribution transformers by Customers’ Billings: Case Study,” INGE CUC, vol. 10, no. 2, pp. 27-35, 2014.spa
dcterms.references[36] F. J. T. E. Ferreira, et al., "Overview of retrofitting options in induction motors to improve their efficiency and reliability," in 2018 IEEE International Conference on Environment and Electrical Engineering and 2018 IEEE Industrial and Commercial Power Systems Europe (EEEIC/I&CPS Europe), Palermo, pp. 1-12, 2018.spa
dcterms.references[37] A.T. De Almeida, et al, “Technical and economic considerations on super high-efficiency three-phase motors”, IEEE Transactions on Industry Applications, vol. 50, no. 2, pp. 1274-1285, 2014.spa
dcterms.references[38] J. Fong, et al., “IEC61800-9 system standards as a tool to boost the efficiency of electric motor driven systems worldwide”, Inventions 2020, 5, 20, pp 1-15spa
dc.source.urlhttp://ijpeds.iaescore.com/index.php/IJPEDS/article/view/21057spa
dc.rights.accessrightsinfo:eu-repo/semantics/openAccessspa
dc.identifier.doihttp://doi.org/10.11591/ijpeds.v12.i1.pp%25p
dc.type.hasversioninfo:eu-repo/semantics/publishedVersionspa


Files in this item

Thumbnail
Thumbnail

This item appears in the following Collection(s)

Show simple item record

CC0 1.0 Universal
Except where otherwise noted, this item's license is described as CC0 1.0 Universal