Influencia del uso del agua lluvia de la ciudad de Bogotá y Barranquilla en la resistencia a la compresión de morteros hidráulicos fabricados
Trabajo de grado - Pregrado
2021
Corporación Universidad de la Costa
The construction industry is one of the main polluting sources on the planet, within which the use of drinking water is immersed as an indispensable material in construction processes, especially in the manufacture of concrete and mortar. Building activity is not only a consumer of natural resources, but also a generator of some of the current environmental problems, because is consider that it is time to implement construction alternatives with less environmental impact. This project aims to measure the effect of the use of rainwater collected in the cities of Bogotá and Galapa on the compressive strength of hydraulic mortar. For this purpose, test mortar buckets with rainwater are made and compared with mortar buckets with water suitable for hydraulic mortar from both cities. The materials used in this research were analyzed in the laboratory according to the Colombian technical standards NTC.220 and NTC.3459. 48 test mortar buckets will be made with rainwater and tap water for hydraulic mortar respectively. All mortar cubes failed under compression and it was observed that the use of rainwater does not have a great influence on compressive strength, its variability does not exceed 10% compared to tap water for hydraulic mortars. The total average compressive strength using rainwater obtained in the municipalities of Galapa - Atlántico and the Cundinamarca table was (11.27 MPa and 11.97 MPa respectively) and the total average compressive strength using tap water for hydraulics mortar obtained in the municipalities of La Mesa - Cundinamarca and Galapa - Atlántico was (13.28 MPa and 12.25 MPa respectively). The variability of the results may be due to the pH levels and the presence of total solids that the rainwater presented in its characterization. La industria de la construcción es una de las principales fuentes contaminantes del planeta,
dentro de la cual está inmerso el uso del agua potable como material indispensable en los
procesos constructivos, en especial en la fabricación del concreto y del mortero. La actividad
edilicia no solo es consumidora de recursos naturales, sino también generadora de algunos de los
problemas ambientales actuales, como los altos índices de CO2, falta de agua en las regiones
apartadas de Colombia. Es por esto que se considera que es hora de implementar alternativas de
construcción de menor impacto ambiental. Este proyecto, tiene como objeto medir el efecto del
uso de las aguas lluvias recolectadas en las ciudades de Bogotá y Galapa, sobre la resistencia a
compresión del mortero hidráulico. Para tal fin, se elaboraron cubos de mortero de prueba con
aguas lluvias y se compararon con cubos de mortero con agua apta para mortero hidráulico de
ambas ciudades. Los materiales usados en esta investigación se analizaron en el laboratorio
según las normas técnicas colombianas NTC.220 y NTC.3459. Se elaborarán 48 cubos de
mortero de prueba con agua lluvia y con agua de grifo para mortero hidráulico respectivamente.
Todos los cubos de mortero se fallaron a compresión y se observó que la utilización de las aguas
lluvias no presenta una gran influencia en la resistencia a la compresión, su variabilidad no
supera el 10% en comparación con el agua de grifo para morteros hidráulicos. La resistencia a la
compresión promedio total utilizando las aguas lluvias obtenida en los municipios de Galapa -
Atlántico y la mesa Cundinamarca fue de (11,27 MPa y 11,97 MPa respectivamente) y la
resistencia a la compresión promedio total utilizando el agua de grifo para mortero hidráulico
obtenida en los municipios de la mesa - Cundinamarca y de Galapa - Atlántico fue de (13,28
MPa y 12,25 MPa respectivamente). La variabilidad de los resultados puede deberse a los niveles
de pH y la presencia de solidos totales que presento el agua lluvia en su caracterización.
- Pregrado [1283]
Descripción:
INFLUENCIA DEL USO DEL AGUA DE LLUVIA DE LA CIUDAD DE BOGOTÁ Y BARRANQUILLA EN LA RESISTENCIA A LA COMPRESIÓN DE MORTEROS HIDRÁULICOS FABRICADOS.pdf
Título: INFLUENCIA DEL USO DEL AGUA DE LLUVIA DE LA CIUDAD DE BOGOTÁ Y BARRANQUILLA EN LA RESISTENCIA A LA COMPRESIÓN DE MORTEROS HIDRÁULICOS FABRICADOS.pdf
Tamaño: 2.141Mb
PDFLEER EN FLIP
Título: INFLUENCIA DEL USO DEL AGUA DE LLUVIA DE LA CIUDAD DE BOGOTÁ Y BARRANQUILLA EN LA RESISTENCIA A LA COMPRESIÓN DE MORTEROS HIDRÁULICOS FABRICADOS.pdf
Tamaño: 2.141Mb
PDFLEER EN FLIP
El ítem tiene asociados los siguientes ficheros de licencia: