Distribución en planta del laboratorio de pintura de la Escuela Naval de Suboficiales ARC “Barranquilla”
Trabajo de grado - Pregrado
2018-04-17
Corporación Universidad de la Costa
En el presente proyecto se realizó la propuesta de una nueva distribución del
laboratorio de materiales compuestos de la Escuela Naval de Suboficiales ARC
“Barranquilla” (ENSB), con el fin de reducir el costo y mejorar su proceso de producción de
pintura vinilo tipo I, también se hizo un análisis de costos en el que se realizaron
comparaciones entre la distribución actual y la distribución propuesta. Todo esto con el
objetivo de verificar cuál de las distribuciones es más rentable, que garantice una producción
eficiente. El documento se divide en tres capítulos, en el primero se presentan generalidades
del proyecto. En el segundo, se realizó un análisis de la situación actual del proceso y la
distribución del laboratorio de materiales compuestos de la ENSB, esto se hizo a través de un
análisis de factores y un estudio de métodos y tiempos con la finalidad de realizar los
diagramas correspondientes al proceso, observar falencias y proponer algunas mejoras dentro
del proceso; se determinó el costo de la distribución actual. En el capítulo tres se muestran los
resultados de las mejoras implementadas dentro del proceso y a través del método CRAFT se
establece un diseño de redistribución que busca optimizar tiempo, espacios y costos. Se lleva
a cabo un análisis comparativo de costos de la distribución actual y la propuesta. Por último
se plantea una serie de recomendaciones de mejora basadas en lo evidenciado. In the present project the proposal of a new distribution of the laboratory of composite
materials of the Naval School of Sub-officers ARC "Barranquilla" (ENSB) was made, in
order to reduce the cost and improve its production process of type I vinyl paint, A cost
analysis was also carried out in which comparisons were made between the actual
distribution and the proposed distribution. All this with the aim of verifying that the
distributions are more profitable, that guarantees an efficient production. The document is
divided into three chapters, the first presents generalities of the project. In the second, an
analysis of the real situation of the process and the distribution of the laboratory of composite
materials of the ENSB was made, this was done through a factor analysis, and a study of
methods and times in order to make the diagrams corresponds to the process, observe
shortcomings and propose some improvements to the process; the cost of the current
distribution was determined. Chapter three shows the results of the improvements
implemented within the process and through the CRAFT method, a redistribution design is
established that seeks to optimize time, space and costs. A comparative analysis of the costs
of the current distribution is carried out and the proposal for the last one made a series of
improvement recommendations based on the evidence.
- Pregrado [1280]
Descripción:
1047344777-1045709010.pdf
Título: 1047344777-1045709010.pdf
Tamaño: 3.547Mb
PDFLEER EN FLIP
Título: 1047344777-1045709010.pdf
Tamaño: 3.547Mb
PDFLEER EN FLIP